Planet WAP-200N User Manual page 71

The page includes the following settings:
Object
• Wireless Mode
• Channel HT Mode
• Extension Channel
• Channel / Frequency
• Auto
• AP Detection
• Current Profile
SSID Profile
• SSID
• VLAN ID
• Suppressed SSID
• Station Separation
• Wireless Security
• Save
• Cancel
In the CB/WDS STA/CR/Repeater mode, select Security Mode on the "Wireless Network" page to configure
the wireless security to be the same as the root AP's security settings.
Description
Wireless mode supports 802.11b/g/n mixed modes.
The default channel bandwidth is 20/40MHz. The larger the channel, the
better the transmission quality and speed.
Select upper or lower channel. Your selection may affect the Auto channel
function.
Select the channel and frequency appropriate you're your country's
regulation.
Check this option to enable auto-channel selection.
AP Detection can select the best channel to use by scanning nearby
areas for Access Points.
Configure up to four different SSIDs. If many client devices will be
accessing the network, you can arrange the devices into SSID groups.
Click Edit to configure the profile and check whether you want to enable
extra SSIDs.
Specify the SSID for the current profile.
Specify the VLAN tag for the current profile.
Check this option to hide the SSID from clients. If checked, the SSID will
not appear in the site survey.
Click the appropriate radio button to allow or prevent communication
between client devices.
Refer to section 5.5.3 Security
Click Save to save changes.
Click Cancel to cancel the unsaved changes and revert to the previous
settings.
-70-
User Manual of WAP-200N/WBS-200N
Setting.