Planet WAP-200N User Manual page 73

The page includes the following settings:
Object
• Security
• WEP Key
• AES Passphrase
• MAC Address
• Mode
• Accept
• Cancel
NOTE:
1. The WDS link setting is only available in WDS Bridge mode and is communicating through
wireless MAC address to each other by using non-standard protocol which may not be
compatible with other brands/models of device. Using the same model for full compatibility is
required.
2. The security setting in each site of WDS link must be the same.
3. The wireless channel must be fixed and must be the same in each site of WDS link.
Figure 5-35 WDS Link Settings – WDS Bridge Mode
Description
Select the type of WDS security: None, WEP, or AES.
Enter the WEP key if select security as WEP.
Enter the AES passphrase if select security as AES
Enter the wireless MAC address of the AP to which you want to extend
wireless connectivity.
Select Disable or Enable to disable or enable WDS.
Click Accept to save the settings.
Click Cancel to cancel the unsaved changes and revert to the previous
settings.
User Manual of WAP-200N/WBS-200N
-72-