Table of Contents
Advertisement
ATM Expansion Modules
There are three Avaya P330 ATM Expansion Modules:
•
X330-OC12F1:
•
X330-OC12S1:
The ATM Modules can be installed in the following Avaya P330 Family switches:
•
Avaya P333T Hardware Version C/S 1.3 and higher, with Embedded S/W 2.4
and higher.
Note: The ATM Expansion Module cannot be used in Avaya P333T hardware
Versions lower than C/S 1.3.
•
Avaya P334T Embedded S/W Ver. 2.4 and higher.
•
Avaya P332MF Embedded S/W Ver. 3.0 and higher.
•
Avaya P333R Embedded S/W Ver. 2.4 and higher.
Refer to the Avaya X330 ATM Access Module Installation Guide for installation
procedures.
The multimode Avaya X330-OC12F1 and X330-OC3F1 (future) ATM Modules are
Class 1 LED products. The single-mode X330-OC12S1 ATM Module is a Class 1
Laser product. They comply with EN 60825-1 and Food and Drug Administration
(FDA) 21 CFR 1040.10 and 1040.11.
The Modules must be operated under recommended operating conditions.
Safety Information
Single-mode Module Laser Classification
LASER PRODUCT
Note: Class 1 lasers are inherently safe under reasonably foreseeable conditions of
operation.
Caution: The use of optical instruments with this product will increase eye hazard.
Avaya P332MF User's Guide
500m, Multimode fiber, can also be OC-3 reduced range
15 km, Single-mode fiber, can also be OC-3
CLASS 1
Appendix A
Specifications
155
Advertisement
Table of Contents
