Tyre Chains - Chevrolet Camaro 2018 Owner's Manual

Hide thumbs Also See for Camaro 2018:
Table of Contents

Advertisement

Replace wheels, wheel bolts, wheel
nuts, or Tyre Pressure Monitor
System (TPMS) sensors with new
GM original equipment parts.
Warning
Using the wrong replacement
wheels, wheel bolts, or wheel
nuts can be dangerous. It could
affect the braking and handling of
the vehicle. Tyres can lose air,
and cause loss of control, causing
a crash. Always use the correct
wheel, wheel bolts, and wheel
nuts for replacement.
Caution
The wrong wheel can also cause
problems with bearing life, brake
cooling, speedometer or
odometer calibration, headlamp
alignment, rear differential,
bumper height, vehicle ground
(Continued)
Caution (Continued)
clearance, and tire or tire chain
clearance to the body and
chassis.
See If a Tyre Goes Flat 0 250 for
more information.
Used Replacement Wheels
Warning
Replacing a wheel with a used
one is dangerous. How it has
been used or how far it has been
driven may be unknown. It could
fail suddenly and cause a crash.
When replacing wheels, use a
new GM original equipment
wheel.

Tyre Chains

Use tyre chains or other traction
devices only when necessary.
Use only 11 mm traction cables that
meet or exceed SAE Class "S"
requirements and that are the
Vehicle Care
correct size for the 245/40R20 or
275/40ZR20 tyres. Install them on
the rear tyres only, as tightly as
possible with the ends securely
fastened.
Caution
Do not install traction devices on
the front tyres.
Drive slowly and follow the cable
manufacturer's instructions. If the
cables are contacting the vehicle,
stop and retighten them. If the
contact continues, slow down until it
stops.
Caution
To help avoid damage to the
vehicle, drive slowly, do not spin
the wheels, and readjust or
remove the device if it contacts
the vehicle.
249

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents