Chevrolet Camaro 2018 Owner's Manual page 260

Hide thumbs Also See for Camaro 2018:
Table of Contents

Advertisement

Caution (Continued)
or tyres. When applying a tyre
dressing, always wipe off any
overspray from all painted
surfaces on the vehicle.
Wheels and Trim
Aluminium
or Chrome
Use a soft, clean cloth with mild
soap and water to clean the wheels.
After rinsing thoroughly with clean
water and dry with a soft, clean
towel. A wax may then be applied.
Caution
Chrome wheels and other chrome
trim may be damaged if the
vehicle is not washed after driving
on roads that have been sprayed
with magnesium, calcium,
or sodium chloride. These
chlorides are used on roads for
conditions such as ice and dust.
Always wash the chrome with
soap and water after exposure.
Caution
To avoid surface damage, do not
use strong soaps, chemicals,
abrasive polishes, cleaners,
brushes, or cleaners that contain
acid on aluminium or
chrome-plated wheels. Use only
approved cleaners. Also, never
drive a vehicle with aluminium or
chrome-plated wheels through an
automatic car wash that uses
silicone carbide tyre cleaning
brushes. Damage could occur
and the repairs would not be
covered by the vehicle warranty.
Brake System
Visually inspect brake lines and
hoses for proper hook-up, binding,
leaks, cracks, chafing, etc. Inspect
disc brake pads for wear and discs
for surface condition. Inspect drum
brake linings/shoes for wear or
cracks. Inspect all other brake parts.
Vehicle Care
Steering, Suspension, and
Chassis Components
Visually inspect steering,
suspension, and chassis
components for damaged, loose,
or missing parts or signs of wear at
least once a year.
Inspect power steering for proper
attachment, connections, binding,
leaks, cracks, chafing, etc.
Visually check constant velocity joint
boots and axle seals for leaks.
Body Component Lubrication
Lubricate all key lock cylinders,
bonnet hinges, tailgate hinges, and
steel fuel door hinge unless the
components are plastic. Applying
silicone grease on weatherstrips
with a clean cloth will make them
last longer, seal better, and not stick
or squeak.
Underbody Maintenance
At least twice a year, spring and fall,
use plain water to flush any
corrosive materials from the
259

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents