Driver Mode Control - Chevrolet Camaro 2018 Owner's Manual

Caution
Do not repeatedly brake or
accelerate heavily when TCS is
off. The vehicle driveline could be
damaged.
To turn off only TCS, press and
release . The traction off light
displays in the instrument cluster.
To turn TCS on again, press
The traction off light displayed in
the instrument cluster will turn off.
If TCS is limiting wheel spin when
is pressed, the system will not
turn off until the wheels stop
spinning.
To turn off both TCS and StabiliTrak,
press and hold until the traction
off light and StabiliTrak OFF light
come on and stay on in the
instrument cluster.
To turn TCS and StabiliTrak on
again, press
light and StabiliTrak OFF light
in the instrument cluster turn off.
Adding accessories can affect the
vehicle performance. See
Accessories and Modifications
0 202.
Engine Drag Control (EDC)
EDC improves vehicle stability by
sensing if there is a difference in
.
speed between the free rolling front
wheels and the rear drive wheels
that often occurs when the drivers
take their foot off the accelerator
pedal on slippery surfaces (snow,
ice, etc.). When this is detected,
EDC sends more torque to the rear
wheels to make sure all four wheels
are spinning at similar speeds,
making the vehicle more stable.
Driving and Operating
. The traction off

Driver Mode Control

Driver Mode Control attempts to add
a sportier feel, provide a more
comfortable ride, or assist in
different weather conditions or
terrain. This system simultaneously
changes the software calibration of
various sub-systems. Depending on
the option package, available
features, and mode selected, the
suspension, steering, and
powertrain will change calibrations
to achieve the desired mode
characteristics. If the vehicle is
equipped with Magnetic Ride
Control, selecting the various Driver
Modes adjusts the ride of the
vehicle to enhance the ride
performance for the road conditions
and the selected mode.
183