Chevrolet Camaro 2018 Owner's Manual page 191

190 Driving and Operating
Cruise Control with Cancel Button
Cruise Control without Cancel
Button
1
: Press to turn the system on and
off. A white indicator appears in the
instrument cluster when cruise is
turned on.
: If equipped, press to disengage
cruise control without erasing the
set speed from memory.
RES+ : If there is a set speed in
memory, press briefly to resume to
that speed or hold upward to
accelerate. If cruise control is
already active, use to increase
vehicle speed.
SET : Press briefly to set the
speed and activate cruise control.
If cruise control is already active,
use to decrease speed.
Setting Cruise Control
1
If is on when not in use, SET- or
RES+ could get bumped and go into
cruise when not desired. Keep
when cruise control is not
being used.
1
1. Press to turn cruise
control on.
2. Get up to the speed desired.
3. Press and release SET-.
4. Remove your foot from the
accelerator.
The cruise control indicator on the
instrument cluster turns green after
cruise control has been set to the
desired speed. See Instrument
Cluster 0 107.
Resuming a Set Speed
If the cruise control is set at a
desired speed and then the brakes
are applied or
if equipped; the cruise control is
disengaged without erasing the set
speed from memory.
Once the vehicle speed reaches
about 40 km/h (25 mph) or more,
briefly press RES+. The vehicle
returns to the previous set speed.
Increasing Speed While Using
1
off
Cruise Control
If the cruise control system is
already activated:
Press and hold RES+ until the
desired speed is reached, and
then release it.
is pressed,