adjust the value. Press SEL to set
the speed. Once the speed is set,
this feature can be turned off by
pressing SEL while viewing this
page. If the selected speed limit is
exceeded, a pop-up warning is
displayed with a chime.
Display Option (Uplevel) : Press
SEL while Display Option is
highlighted to change the
configuration of the uplevel cluster.
See "Reconfigurable Instrument
Cluster" earlier in this section.
Info Pages : Press
while Info
Pages is highlighted to select the
items to be displayed in the DIC info
displays. See Driver Information
Centre (DIC) 0 124.
Software Info : Press
Software Info is highlighted to
display open source software
information.
Speedometer
The speedometer shows the
vehicle's speed in either kilometres
per hour (km/h) or miles per
hour (mph).
Mileometer
The odometer shows how far the
vehicle has been driven, in either
kilometres or miles.
Trip Odometer
The trip odometer shows how far
the vehicle has been driven since
the trip odometer was last reset.
The trip odometer is accessed and
reset through the Driver Information
Centre (DIC). See Driver
Information Centre (DIC) 0 124.
Rev Counter
The tachometer displays the engine
speed in revolutions per
minute (rpm).
while
If the engine is operated with the
rpm in the warning area at the
high end of the tachometer, the
vehicle could be damaged, and
the damage would not be covered
Instruments and Controls
Caution
(Continued)
Caution (Continued)
by the vehicle warranty. Do not
operate the engine with the rpm in
the warning area.
Fuel Gauge
Base Level Cluster
111