Creating A User Account - Avaya 580 User Manual

CLI Commands

Creating a User Account

Web Agent
Procedure
Document No. 10-300077, Issue 2
To configure user account security, use the following CLI command:
(configure)# set login [attempts <num-login-attempts>] [timeout-
limit <timeout-limit>] [min-password-length <min-password-length>]
To view the current settings for user account security, use the following CLI
command:
# show login
You can create up to 27 user accounts.
Only users that have administrator access can perform the following tasks:
View the running configuration and startup configuration.
Copy text files to or from a TFTP server.
Download BOOT, APP1, and APP2 images to the switch.
Update the software on a module.
Access the Load MIB.
* Note: To log in to the ATM Uplink module, a user must:
• Have read-write access to the Modules and Ports
Management features.
• Enter Privileged mode or Global Configuration mode to
enter the session <slot number> command.
In earlier versions of application software, you could log in to
the ATM Uplink module from User mode. This change in
functionality prevents unauthorized users from logging in to the
ATM Uplink module.
To create a user account:
1. In the navigation pane, expand the System > Administration folders.
2. Click User Accounts. The User Account Management Web page is
displayed in the content pane. See
3. Click Add. The Add User Account Web page is displayed in the content
pane. See Figure 2-10.
Setting Up the Switch
Figure 2-9.
2-19