Table of Contents
Advertisement
4079-00X
Defaults
Use this option whenever the controller board is replaced to make
sure the national defaults are set correctly. The only value currently
affected is paper size, which is different for non-U.S. users.
Service Adjustment Mode
In Service Adjustment Mode, adjustments can be made to the offset
of the color ink jets relative to each other, and several cleaning
modes can be entered.
Details on the Service Adjustment Mode are in
page
4-2.
To enter Service Adjustment Mode:
1. Make sure the printer power is off.
2. Press and hold Menu and List+ while turning on the printer. You
can release the key when the "04 Reset" (4079-001) or "05 Self Test"
(4079-002) is displayed.
•
"Read" is displayed on the first line of the display and the sec-
ond line has a checkered pattern.
•
Press Select to exit Ready mode.
•
Pressing List+ will scroll through the menu.
The adjustments that can be made in this mode are listed
ments" on page
4-2.
"Adjustments" on
in"Adjust-
Diagnostic Aids
3-12
Advertisement
Table of Contents
