Invacare Linx REM500 User Manual page 92

LiNX® Control System
Risk of property damage
Handle USB charger with care, otherwise damage
could occur.
– Always keep the USB charger dry. If USB
charger gets wet, let USB charger dry before
use.
– Do not use or store USB charger in dusty or
dirty areas.
– Do not insert sharp objects into the USB ports.
WARNING!
Risk of Injury or Damage
Erratic or unintended movement of the
wheelchair may occur if wireless transmitters are
connected to the wheelchair. To avoid injury or
damage:
– DO NOT use the USB charger connector as a
wireless transmitter.
– Only use the USB charger for the purposes
described in this manual.
With the USB charger you can charge the battery of your
mobile phone or a compatible device when you do not have
access to a regular power source. Both USB ports can be
used at the same time and each USB port has a charging
current up to 1 A.
92
1.
Open bung A.
2. Connect device with USB port.
Replace bung when USB ports are not in use.
The usage of the USB charger influences the drive
range of the mobility device. For more information
about the drive range, refer to chapter Technical
Data in the user manual of your mobility device.
60101833-A