If the device paired successfully, a confirmation screen is
displayed on the remote module. Tap on the OK button
to proceed.
If no device is paired within the set timeout period, a
message is displayed "No device was paired". Tap on OK
button to proceed.
The LiNX system permits up to ten devices to be
paired at any time. If you have reached this limit and
you need to add more devices, consider forgetting
devices, that have already been paired, refer to
5.14.2 Operating the mouse mover, page 68.
60101833-A
Linking the connectivity card with the user's device
Connectivity cards must be linked to a paired device. To
link a connectivity card to a device, open the connectivity
settings menu.
1.
Long press navigation button A.
2.
Status display opens. Open Settings menu B.
3.
Usage
65