Table of Contents
Advertisement
LiNX® Control System
•
If Navigation entry is set to Active User Function, the
currently selected function card item is displayed on the
touch screen. If this function card is not selected, the
system iterates once through the remaining function
card items in the profile, wrapping around from the last
menu item to the first, if necessary. During this single
iteration, a function card must be selected, otherwise
the menu reverts to the profile menu.
If the system reverts to the profile menu, the first item
in the profile menu is displayed on the touch screen. If
this item is not selected, the system iterates through
the profile menu until a profile is selected or until the
number of iterations is reached, at which point the
menu displays the idle state.
If a profile is selected before the system goes into idle
state, the system displays the first item in the function
card menu. If this item is not selected, the system
iterates through the function card menu until a function
is selected or until the number of iterations is reached,
at which point the menu displays the idle state.
36
Scan select with 4Q or 3Q operation
User input type
4Q:
•
joystick
•
Sip and Puff
•
Sip and Puff Head
Array
3Q:
•
Head Array
•
Four Switch Proximity
Array
Like in menu select, it is possible, to go back from function
card menu to profile menu or close the profile menu. The
control navigation items are displayed in the scanning
Mapping for scan select
left input: select
right input: select
reverse input: select
forward input: select
left input: select
right input: select
reverse input: disabled
forward input (Four Switch
Proximity Array only):
disabled
60101833-A
- Quick Links:
- Setting up a Mouse Mover
Hide quick links:
Advertisement
Table of Contents
