Invacare Linx REM500 User Manual page 29

The screen view focuses on the first function card or
the last-used function card in the profile, depending on
how the programming is set up.
2. Swipe left or right to change function cards.
3. Tap on selected function card, tap navigation button or
wait for a few seconds to activate selected function card.
Using tap mode
Changing function cards
1.
Tap on navigation button (short press) to open card
preview display.
2.
Tap to left or right of card that is in the middle of
display to change function cards.
3. Tap on selected function card, tap navigation button or
wait for a few seconds to activate selected function card.
Changing profiles
1.
Profile 1
60101833-A
Profile 2
Profile 3
Profile 4
Tap above or below function card that is in the middle
of display to activate another profile.
The screen view focuses on the first function card or
the last-used function card in the profile depending on
how the programming is set up.
2. Tap on navigation button or wait for a few seconds to
activate selected function card.
Using control input (CI)
A control input can be any external switch, for example, an
egg switch or a lip switch at a Sip and Puff Array.
1. Short press to change function card.
2. Long press to change profile.
Usage
29