Invacare Linx REM500 User Manual page 83

If the head comes within 6 mm of a sensor, the sensor is
activated and the wheelchair starts driving.
By default, the Head Array powers up as soon as the
wheelchair is powered up and powers down as soon as the
wheelchair is powered down.
Be aware, that when powering up automatically with
the wheelchair, your head has to be more than 6
mm away from the proximity sensors, otherwise a
drive OON warning is displayed and prevents the
wheelchair from driving. For more information about
OON, refer to 7.2 OON ("Out Of Neutral"), page 99.
Driving
1. Activate forward drive function card.
Activate center pad A to drive forwards.
2. Change to reverse drive function card.
Activate center pad A to drive in reverse.
60101833-A
3. Change back to forward drive function card.
Activate center pad A and right pad B at the same
time to veer to the right.
4. Activate center pad A and left pad C at the same time
to veer to the left.
Indicators for forward and reverse are shown in the display.
Forward drive function card
Usage
Reverse drive function card
83