Invacare Linx REM500 User Manual page 55

• Powered seat tilt only
• Center-mount elevating legrest (LNX) only
1. Make sure mobility device is on level surface and turned
on.
2. Press and hold tagged area of egg switch to run
powered seating function.
3. Release egg switch if desired seating position is reached.
If egg switch is pressed again within three seconds,
powered seating function moves into same direction.
4. To alternate direction, press egg switch after it has been
released for more than three seconds.
Stereo toggle switch
The stereo toggle switch alternates powered seating
functions of the following single power configurations:
• Powered recline only
• Powered seat tilt only
• Center-mount elevating legrest (LNX) only
60101833-A
1. Make sure mobility device is on level surface and turned
on.
2. Deflect and hold toggle switch up A or down B to
move particular seating function.
Seating function moves as long as toggle switch is
deflected.
Stereo button switch
The stereo button switch alternates powered seating
functions of the following single power configurations:
• Powered recline only
• Powered seat tilt only
• Center-mount elevating legrest (LNX) only
1. Make sure mobility device is on level surface and turned
on.
2. Press and hold stereo buttons A or B to move
particular seating function.
Seating function moves as long as button is pressed.
Usage
55