Part Ii - Power Cable With Flying Leads; Part Iii - Power Connector And Cable Assembly Instructions - Motorola MOTOMESH Duo 4300-49 User Manual

Part II – Power Cable with Flying Leads
1. The initial Power Cable will have three wires: Brown (Line), Blue (Neutral), and
Green/Yellow (Ground/Earth).
Figure 3-29
Part III – Power Connector and Cable Assembly Instructions
2. Loosen the Strain Relief Screws on the plug.
Figure 3-30
Strain Relief Screws
3. Place the three wires under the Strain Relief Bar and pull through. Allow the Blue and
Green Wire to pull through on the left side of the Screw Well and the Brown Wire to pull
through on the right hand side of the Screw Well.
May 2008
Power Cable with Wire Designation
Inside View Pointing out Strain Relief Bar and Screws
Strain Relief Bar
3-13
MOTOMESH DUO 2.1 4300 Users Guide
Brown Wire is Line
Blue Wire is Neutral
GREEN/Yellow Wire is Earth