Chapter 3: Wiring Instructions
•
Cut Back the Red Wire (not shown in graphic)
•
Insert the Green Wire into the green color lug and tighten.
•
Insert the Black Wire into the Bronze color lug and tighten.
•
Insert the White Wire into the Silver color lug and tighten.
Figure 3-7
4. Insert Plug Terminal into Connector Body and tighten.
Figure 3-8
5. The finished power connector and cable assembly will look like the image shown below.
Figure 3-9
May 2008
Correct Attachment of Terminal Wires
Plug Terminal Inside Connector Body
Finished Power Connector and Cable Assembly
3-4