Figure 3-22 Correct Position Of The Cable Wires Attached To The Plug; Figure 3-23 Finished Plug - Motorola MOTOMESH Duo 4300-49 User Manual

Chapter 3: Wiring Instructions
7. Spread out the three wires, so that the Blue wire is on the right side, the Brown wire is on
the left hand side, and the Green wire is in the center.
8. Attach the cable wires to the terminal plug in the following way:
Figure 3-22
9. Fold the plug back into a closed position and turn the plug to show the access screw. Tighten
the Access Screw on the plug to lock the plug assembly in place.
Figure 3-23
May 2008
Correct Position of the Cable Wires Attached to the Plug.
Finished Plug
3-10
Insert the Green Wire into
the Ground lug and tighten.
Insert the Green Wire into
the Ground lug and tighten.
Insert the Blue Wire into the
Neutral lug and tighten.
Access Screw