Infrastructure Device Assembly - Motorola MOTOMESH Duo 4300-49 User Manual

Infrastructure Device Assembly

Figure 2-5
below it shows some examples of optional personality plugs (Black – Canopy Connect PoE, and
Standards based 802.3 af PoE White). For Personality Plug usage information, see the
Plug Usage Information
available and is used to reset a 4300 device back to its factory default configuration. For Reset Plug
usage information, please see the section entitled
Figure 2-5
N-Type Antenna
(2.4)
Gore Vent
Power ON
Indicator Light
An optional External
Personality Plug is
connected here
ONLY if the
Standards based
802.3af PoE or
Canopy PoE (option)
is purchased. If
neither PoE is
purchased, the port
Figure 2-6
will be covered.
NOTE: An optional Red Hardware Reset Plug (not shown
above) is used to reset a 4300 device back to its factory
default configuration. The Hardware Reset Plug must be
inserted for more than 4 seconds and then removed.
May 2008
shows the external connection points for a MOTOMESH Duo 4300-58 device. The figure
section in this chapter. A red Hardware Reset Plug (not shown below) is also
Infrastructure Device Top View showing External Connection Points
A
Device Hinges
External Personality Plugs (Optional)
MOTOMESH DUO 2.1 4300 Users Guide
Reset Plug Usage Information.
B
Black plug for use
with the Canopy
Connect PoE option.
White plug for use with
the Standards based
802.3af PoE option.
2-7
Personality
N-Type Antenna
N-Type Antenna (5.8)
N-Type Antenna (5.8)
(available in 4.9, 5.4, or
5.8 GHz)
Primary Ethernet Port
Ethernet Port
Power