HP 12500 Series Command Reference Manual page 29

interface-number: Specifies an existing aggregate interface by its number.
Usage guidelines
If you specify only bridge-aggregation or route-aggregation, this command displays information
about all Layer 2 or Layer 3 aggregation groups.
If no aggregate interface type is specified, this command displays information about all
aggregation groups.
The bridge-aggregation or route-aggregation keyword is available only after you create Layer 2 or
Layer 3 aggregate interfaces on the device.
Examples
# Display detailed information about the aggregation group that correspond to Layer 2 aggregate
interface Bridge-Aggregation 10, which is a dynamic aggregation group.
<Sysname> display link-aggregation verbose bridge-aggregation 10
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Port Status: S -- Selected, U -- Unselected
Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
Aggregate Interface: Bridge-Aggregation10
Aggregation Mode: Dynamic
Loadsharing Type: Shar
System ID: 0x8000, 000f-e267-6c6a
Local:
Port
--------------------------------------------------------------------------------
GE3/0/26
GE3/0/32
Remote:
Actor
--------------------------------------------------------------------------------
GE3/0/26
GE3/0/32
# Display detailed information about the aggregation group that corresponds to Layer 2 aggregate
interface Bridge-Aggregation 20, which is a static aggregation group.
<Sysname> display link-aggregation verbose bridge-aggregation 20
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Port Status: S -- Selected, U -- Unselected
Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
Aggregate Interface: Bridge-Aggregation20
Aggregation Mode: Static
Loadsharing Type: Shar
Port
--------------------------------------------------------------------------------
Status Priority Oper-Key
S 32768 2
S 32768 2
Partner Priority Oper-Key
32 32768 2
26 32768 2
Status Priority Oper-Key
Flag
{ACDEF}
{ACDEF}
SystemID
0x8000, 000f-e267-57ad {ACDEF}
0x8000, 000f-e267-57ad {ACDEF}
24
Flag