Interface Vlan-Interface; Mtu - HP 12500 Series Command Reference Manual

interface vlan-interface

Use interface vlan-interface to create a VLAN interface and enter its view or to enter the view of an
existing VLAN interface.
Use undo interface vlan-interface to delete the specified VLAN interface.
Syntax
interface vlan-interface vlan-interface-id
undo interface vlan-interface vlan-interface-id
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
vlan-interface-id: Specifies a VLAN interface number in the range of 1 to 4094.
Usage guidelines
Create the VLAN before you create the VLAN interface.
Examples
# Create VLAN interface 2, and enter its view.
<Sysname> system-view
[Sysname] vlan 2
[Sysname-vlan2] quit
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2]
Related commands
display interface vlan-interface

mtu

Use mtu to set the MTU for a VLAN interface.
Use undo mtu to restore the default.
Syntax
mtu size
undo mtu
Default
The MTU of a VLAN interface is 1500 bytes.
Views
VLAN interface view
101