Computer Cables And Adapters; Signal Cables; Table 12: Checklist Alarm Interface Connector Set; Table 13: Checklist Computer Cables - ABB FOX615 Installation & User Manual

4.4.2

Computer cables and adapters

4.4.3

Signal cables


FOX615 Installation
Table 12: Checklist alarm interface connector set
Description
Connector set alarm interfaces:
- Alarm signal input
- Molex connector frame 2 x 4
- 8 Mini-Fit HCSTM crimp pins
(AWG 18 ... AWG 24)
- Alarm signal output
- Molex connector frame 2 x 3
- 6 Mini-Fit HCSTM crimp pins
(AWG 18 ... AWG 24)
Please note:
The alarm connector set contains the connector frames and crimp pins for 1
alarm signal output interface and 1 alarm signal input interface.
The connection of the control unit to the local craft device or to the manage-
ment communication structure (such as a LAN) requires standard computer
cables.
Table 13: Checklist computer cables
Description
Ethernet electrical cables:
FOX side:
- terminated RJ45, signals
crossed over [=], shielded, up to
1 Gbit/s
FOX side:
- terminated RJ45, signals 1:1 [X],
shielded, up to 1 Gbit/s
Ethernet optical cables:
FOX side:
- SFP cage,
connector and fibre specification
depend on SFP module
ABB provides cables for units with traffic interfaces. For most units one cable
connects all the interfaces of the unit.
For information about signal cables, refer to the user manuals of the units.
Identification Quantity
Units
Identification Quantity
Units
(4)
(4)
(2)
C H E C K L I S T S
Remark
Connects 1 of the 3
FAMO1 or FAMO1-
F alarm input inter-
face groups
Connects the alarm
output interface
group of the
FAMO1 or FAMO1-
F
Remark
Uplink and/or man-
agement interfaces
Electrical interfaces
up to 4 per CESM1
Electrical interfaces
up to 4 per CESM1
Uplink and/or man-
agement interfaces
Optical interfaces
up to 2 per CESM1
87