3.6.2
Installing the FAMO1 or FAMO1-F power and alarm cable
(optional)
FOX615
Installation
Figure 30: FOX subrack with DUPF1 installed
This concludes the mechanical installation of the DUPF1. The DUPF1 alarm
interface cable connects to the FAMO1 or FAMO1-F.
For details, refer to section
The
Figure 31
shows the installation of the FAMO1 or FAMO1-F power and
alarm cable to the FOX subrack.
You must install the FAMO1 or FAMO1-F power and alarm cable before the
FOX615 subrack is installed in the rack. The installation is independent of
the DUPF1 option.
I N S T A L L A T I O N P R O C E D U R E S
------
Interfaces and connectors
(on page 66).
55