Packard Bell T19 Disassembly Manual page 8

4. Remove 2 x A screws from the Chipset Heatsink and remove it.
5. Remove 4 x A screws from the Mainboard.
6. Disconnect the two (2) Flatcables from the Mainboard.
7. Slide the Mainboard out of the Bottom Base Assembly.
Modem
1. Remove 2 x C screws from the Modem.
2. Lift up the Modem and disconnect the Modem Cable.
3. Remove the Modem and Modem Cable.
Disassembly Manual EasyNote J2 series
Figure 13
Figure 14
Page 8 of 15