Configuration Menu - ADTRAN TRACER User Manual

61280.003L1-1B
Each menu selection is described below:
1. Loops the local T1-A Interface towards the local customer
equipment.
2. Loops the local T1-B Interface towards the local customer
equipment.
3. Loops the local T1-A interface towards the remote customer
equipment, over the RF Link.
4. Loops the local T1-B interface towards the remote customer
equipment, over the RF Link.
5. Loops the remote T1-A Interface towards the local customer
equipment, over the RF Link.
6. Loops the remote T1-B Interface towards the local customer
equipment, over the RF Link.
C
ONFIGURATION
This screen allows all system configurations to be performed.
10) Reset all statistics
11) Enable/Disable Password
12) Change Password
13) Change Site ID
14) Enable/Disable T1B
=====================================================================
Press 'm' for Main Menu:
4/12/99
yy y y y y
T1-A
1
yy yy yy yy
2
T1-B
Local
M
ENU
TRACER Configuration Menu
Site: Adtran
1) T1A Framing
2) T1A Line Code
3) T1A Line Build Out
4) T1B Framing
5) T1B Line Code
6) T1B Line Build Out
7) Set Chipping Code
8) Set TX Power
9) Set Freq Plan
yy y yy y y y
y y y y
5
3
yy y y y y y y
RF Link
6
4
Remote
Figure 3-8. T1 Loopback Locations
Figure 3-9. Configuration Menu
P 37
AGE
O
PERATION
T1-A
T1-B