Table of Contents
Advertisement
P
32
AGE
S
3
ECTION
P
ASSWORD
Tracer provides optional password protection of the terminal
interface. If enabled, a password prompt is presented at power-
up, reboot, or after thirty minutes of inactivity on the terminal.
The default configuration is "No password." Password protection
is enabled via the configuration menu. The password is also set
via the configuration menu.
If the password is forgotten, physical access to Tracer is required
to access the terminal interface. The password may be bypassed
by holding in the LPBK A button while the system is rebooted.
This will bring up the terminal interface and allow the password
to be changed or disabled via the configuration screen.
C A U T I O N
This procedure is service-affecting.
61280.003L1-1B
4/12/99
Advertisement
Table of Contents
Troubleshooting
