Ac/Dc Power; Controls And Indicators; Bbp Front Panel (With Door Closed); Bbp Front Panel (With Door Open) - ADTRAN TRACER User Manual

61280.003L1-1B
AC/DC P
The unit receives power via one of two connectors. Power for the
entire system is provided by these interfaces. The three-pin circular
DIN connector is provided to connect an optional ADTRAN
desktop AC adapter (ADTRAN part number 1360.DSK24VL1),
providing 24 volts DC. The three-pin terminal block allows the
connection of any DC power source providing between 21 and 56
volts DC. The power consumption of the entire system is 30 watts.
C
ONTROLS AND
The system may be configured via the front panel, which is
accessible behind a drop-down panel on the right half of the BBP .
The front panel is illustrated in the figure below.
Options that are set from the front panel can be overridden via
the terminal interface. As a rule, a green LED indicates a good
situation, a red LED indicates an error situation, and a yellow LED
indicates a configuration option. LEDs indicating overall system
integrity are listed below.
Test .............. Red indicates that the self-test has completed and
PWR ............. Green indicates that DC voltage is applied
4/12/99
OWER
I
NDICATORS
failed
Figure 1-6. BBP Front Panel (with door closed)
Figure 1-7. BBP Front Panel (with door open)
P 9
AGE
T D
RACER ESCRIPTION