ADTRAN TRACER User Manual page 43

61280.003L1-1B
M M S
AIN ENU ELECTIONS
S S
YSTEM TATUS
This page displays the status of major system components. This
is a status screen only; no configurations can be performed. More
detailed information can be obtained by way of the Main Menu.
The upper portion of the screen indicates how long the system
has been running since the last reset operation. The "T1A" and
"T1B" labels will be highlighted if any error conditions exist on
that T1 interface.
The status of the radio link is indicated as Up or Down. The left
portion of the screen reports the status of the local system (the
system to which the terminal is attached); the right portion reports
the status of the remote system. The approximate transmitter
and receiver signal levels are shown via the "fuel gauges." If the
link is down and remote end data is unavailable, the fuel gauges
will show "-" instead of "x." The Code Sync, Carrier Sync, and T1
Mux Sync will all be "yes" for an operational link. Chipping code
indicates the code to which the system is set. At any point in the
VT-100 menu structure, pressing the Escape key will bring the
operator back to this screen.
4/12/99
P
AGE
Current System Status
____ ADTRAN Technical Support - 800/726-8663
T1A ===| |-------------------[RF UP]-------------------->|
| |
T1B ===| |<------------------[RF UP]---------------------|
----
Local Tracer
Freq Plan A
Tx Pwr Rx Pwr
+20dBm[X] [X] Nominal
[X] [X]
[X] [X] Site: ADTRAN
[X] [X]
[X] [X]
[X] [X]
[X] [X]
[X] [X]
[X] [X]
[X] [X]
-15dXm[X] [X] Minimum
=======================================================================
Press 'm' for Main Menu:
Elapsed Time 00:14:59
Code Sync: Yes
Carrier Sync: Yes
T1 Mux Sync: Yes
Chipping Code: 9
Figure 3-1. System Status Page
P
AGE
O
PERATION
____
|=== T1A
| |
|=== T1B
----
Remote Tracer
Freq Plan B
Tx Pwr Rx Pwr
+20dBm[X] [X] Nominal
[X] [X]
[X] [X]
[X] [X]
[X] [X]
[X] [X]
[X] [X]
[X] [X]
[X] [X]
[X] [X]
-15dBm[X] [X] Minimum
33