Table of Contents
Advertisement
Thumbwheel in instrument panel
Thumbwheel (to left) for adjusting interior brightness.
Related information
•
Adjusting light functions via the centre dis-
play (p. 147)
•
Interior lighting (p. 156)
•
Position lamps (p. 147)
•
Using direction indicators (p. 152)
•
Using main beam (p. 149)
•
Dipped beam (p. 149)
•
Rear fog lamp (p. 153)
•
Active bending lights* (p. 152)
•
Brake lights (p. 154)
•
Emergency brake lights (p. 154)
•
Hazard warning flashers (p. 154)
Adjusting light functions via the
centre display
Several light functions can be adjusted and acti-
vated via the centre display, such as active main
beam, home safe lighting and approach lighting.
1. Press
Settings
in the top view.
2. Press
My Car
Lights and
3. Select
Exterior Lights
or
Interior Lighting
Related information
•
Lighting control (p. 146)
•
Active main beam (p. 150)
•
Using home safe lighting (p. 155)
•
Approach light duration (p. 155)
•
Using direction indicators (p. 152)
•
Opening settings in the centre display
(p. 126)
•
Function view in centre display (p. 116)
Position lamps
Position lamps can be used so that other road
users can see the car if it stops or is parked. The
position lamp is switched on with the rotating
ring on the stalk switch.
Lighting.
.
Stalk switch rotating ring in position lamps position.
Turn the rotating ring to the
position lamps are switched on (number plate
lighting is switched on at the same time).
If the car's electrical system is in ignition position
II or the car is running then the daytime running
lights are switched on instead of the front posi-
tion lamps. When the rotating ring is in this posi-
tion, the position lamps are switched on regard-
less of the ignition position of the car's electrical
system.
If the car is stationary but running, the rotating
ring can be moved to the position lamp
LIGHTING
position - the
}}
147
* Option/accessory.
Advertisement
Table of Contents
