Table of Contents
Advertisement
IMPORTANT
•
Check that the 230 V socket (alternating
current) has adequate power capacity for
charging electric vehicles - in the event of
uncertainty, the socket must be checked
by a qualified professional.
•
If the socket has unknown power
capacity - use the lowest level on the
control unit.
Take the charging cable out from the storage
compartment on the right-hand side of the cargo
area. Note that the car must be switched off prior
to charging.
Connect the charging cable to a 230 V
socket. Never use an extension cable.
2. Set the correct charging current (for existing
230 V socket) on the control unit.
Open the charging hatch. Remove the charg-
ing handle's protective cover and then press
the handle the whole way into the socket for
the car.
HYBRID INFORMATION
Clamp the charging handle's cover in place
as illustrated.
IMPORTANT
To avoid damage to the paint, e.g. in the event
of high winds, position the charging handle's
protective cover so that it does not touch the
car.
}}
411
Advertisement
Table of Contents
