Table of Contents
Advertisement
The function is only active in weak daylight or
darkness and only when the car is moving and
dipped beam is switched on.
Deactivating/activating the function
The function is activated when the car is supplied
from the factory and can be deactivated/acti-
vated via the centre display's function view.
Press the
Active Bending
Lights
button.
Related information
•
Adjusting light functions via the centre dis-
play (p. 147)
Rear fog lamp
The rear fog lamp is considerably stronger than
the normal rear lights and should only be used in
reduced visibility due to fog, snow, smoke or
dust so that other road users have an early warn-
ing of a vehicle ahead.
Button for rear fog lamp.
The rear fog lamp is a lamp at the rear of the car,
on the driver's side.
The rear fog lamp can only be switched on when
ignition position II is active or the car is running
and the rotating ring on the stalk switch is in
position
or
.
Press the on/off button. The
driver display illuminates when the rear fog lamp
is switched on.
The rear fog lamp switches off automatically
when the start knob it turned clockwise to switch
off the car or the stalk switch rotating ring is set
to the
or
NOTE
Regulations on the use of rear fog lamps vary
from country to country.
Related information
•
Lighting control (p. 146)
•
Ignition positions (p. 426)
•
Replacing the rear fog lamp bulb (p. 590)
symbol in the
LIGHTING
position.
153
Advertisement
Table of Contents
