NOTE
If the driver display is not used for a while
then it is dimmed. Reactivate the display by
means of one of the following:
•
depress the brake pedal
•
open one of the doors
•
set the car in ignition position I by turning
the START knob clockwise and releasing.
Related information
•
Charging the hybrid battery (p. 403)
•
Symbols and messages relating to Twin
Engine in the driver display (p. 419)
•
Charging status in the car's charging input
socket (p. 412)
•
Charging status in the charging cable's con-
trol unit (p. 414)
•
Stop charging of hybrid battery (p. 418)
HYBRID INFORMATION
417