Table of Contents
Advertisement
LIGHTING
Adjusting light functions via the
centre display
Several light functions can be adjusted and
activated via the centre display. This applies
to active main beam, home safe lighting and
approach light, for example.
1.
Settings
Tap on
in the centre display's
top view.
2. Press
My Car
Lights and
3. Select
Exterior Lights
Lighting
and then select the function that
needs to be adjusted.
Related information
Lighting control (p. 148)
•
Active main beam (p. 154)
•
Using home safe lighting (p. 160)
•
Approach light duration (p. 160)
•
Using direction indicators (p. 155)
•
Other settings in the centre display's top
•
view (p. 127)
Function view in centre display (p. 117)
•
3
Applies to vehicles with halogen headlamps.
150
Adapting the headlamp pattern
from the headlamps
This car does not need to reset the headlamp
pattern when changing from right to left-
hand traffic, and vice versa.
Related information
Other settings in the centre display's top
•
view (p. 127)
Lighting.
Function view in centre display (p. 117)
•
or
Interior
Active bending lights* (p. 156)
•
Adjusting headlamp level
Headlamp levelling
3
is adjusted using one of
the thumbwheels in the instrument panel.
The load in the car changes the vertical align-
ment of the headlamp beam, which could daz-
zle oncoming motorists. Avoid this by adjust-
ing the headlamp level. Lower the beam if the
car is heavily laden.
1.
Keep the engine running or the car's elec-
trical system in ignition position I.
2. Roll the thumbwheel up/down to raise/
lower headlamp level.
The position in which the thumbwheel should
be set for a number of load cases is shown
below.
* Option/accessory.
Advertisement
Table of Contents
