Selecting Ignition Mode - Volvo S90 Twin Engine Owner's Manual

Hide thumbs Also See for S90 Twin Engine:
Table of Contents

Advertisement

Level
Functions
0
Odometer, clock and temperature
gauge are illuminated
The power seats* can be adjusted.
The power windows can be used.
The centre display is started and
can be used
A
.
The infotainment system can be
A
used
.
The functions are time-controlled in
this ignition position and are switched
off automatically after a period of time.
I
Sunroof, power windows, 12V
socket in the passenger compart-
ment, Bluetooth, navigation,
phone, ventilation fan and wind-
screen wipers can be used.
Power seats can be adjusted.
12 V sockets in the cargo area
can be used.
Power is taken from the battery in
this ignition position.
Level
Functions
II
A
.
This ignition position consumes a
lot of current from the battery and
should therefore be avoided!
A
Also activated when the door is opened.
Related information
Starting the car (p. 424)
Adjusting the steering wheel (p. 188)
Using jump starting with another battery
(p. 464)
Selecting ignition mode (p. 427)
The headlamps come on.
Warning/indicator lamps illuminate
for 5 seconds.
Several other systems are acti-
vated. However, heating in seat
cushions and the rear window can
only be activated after the car has
been started.
STARTING AND DRIVING

Selecting ignition mode

The car's electrical system can be set in different
levels/positions and in this way make the differ-
ent functions available.
Selecting ignition position
Start knob in the tunnel console.
Ignition position 0 - Unlock the car and
store the remote control key inside the car.
NOTE
To reach level I or II without starting the
engine - do not depress the brake pedal, or
the clutch pedal for cars with manual gear
changing, when these ignition positions are to
be selected.
}}
427
* Option/accessory.

Advertisement

Table of Contents
loading

Table of Contents