Advertisement
ASSEMBLY INSTRUCTIONS
A
B
8
(11)
Line up all loops to a
T-Section when placed on
top of Frame & Jump Mat
Hook all T-Sections with
loops from Frame Pad
GQBrands.com
STEP 4:
Parts:
1x Frame Pad (Part 11)
A. Flip the Assembled Frame in order to
place the Frame Pad (11).
Make sure to locate all six loops in the
Frame Pad, two of them should have two
openings assigned for the Cross-Section
Pieces. Place on top Frame to cover the
Frame & Jumping Mat.
B. For the T-Sections, hook all loops in the
inserts openings of the T-sections before
installing the legs.
C. For the Cross-Sections, make sure both
openings of the Cross-Section go inside
the according hoops in the Frame Pad.
Hook the loop into the bottom section of
the Cross Section.
Once the Frame Pad is placed, flip the
frame again so the Jump Mat faces the
ground to begin installation of the legs.
C
to upper Cross-
Section Pieces
CustomerService@GQBrands.com
HOOP
Line up hoops
in Frame Pad
Insert Frame
Pad openings
from the top
and hook loops.
1-866-498-5269
Advertisement
