Advertisement
ASSEMBLY INSTRUCTIONS
A
B
(7)
(9)
(10)
10
Facing
Center
C
(10)
(9)
Tighten
Fully
Tighten
(7)
Fully
STEP 8:
Parts:
Facing
Center
A. Insert x2 Straight Poles (13) into the
NOTE:
Straight poles upper openings must face
the center of the trampoline.
B. Locate x2 40mmm Square Neck Bolts
NOTE:
If the Bolts are not inserted from the
outside in, you leave yourself exposed to
the sharp edges of the Nuts. Failure to do
so can result in injury.
C. Once the bolts are inserted properly,
Tighten
Fully
GQBrands.com
CustomerService@GQBrands.com
2x Straight Pole (Part 13)
2x 40mm Square Neck Bolts (Part 7)
2x Nuts (Part 9)
2x Washers (Part 10)
upper openings of the Cross-Sections.
(7), x2 Washers (10), and x2 Nuts (9).
Insert a Bolt from the inside facing out to
each Straight Pole. Tighten both with a
Washer & Nut.
tighten remainder of all nuts to secure
the Straight Poles and Legs to the
Cross-Section Pieces.
1-866-498-5269
Advertisement
