Advertisement
ASSEMBLY INSTRUCTIONS
Assembled Frame
T-Section Locations
A
B
MODEL# 9040MTH
A
A
STEP 1:
NOTE:
The Frame Pad (Part 11) may be already
attached to the Frame, remove it and place
it aside until Step 4
The Frame (Part 1), Jumping Mat (Part 2),
Springs (Part 3), & W-Hooks (Part 4) should
be assembled in one piece.
Place assembled Frame on an even, clean,
& flat surface to install. Make sure that
there are no obstructions in your way when
building the Mini Trampoline.
NOTE:
Make sure that the spring ends are facing
up, and the logo printed on the Jumping
Mat is facing the floor.
A
A
B
Identify all openings
on the Frame Pad.
There are four
sections with 1
opening (A), and
two sections with
B
2 openings (B).
5
Advertisement
