CUSTOMER SERVICE INFORMATION Thank you for purchasing: PRESCHOOL JUMPER KIDS TRAMPOLINE MODEL# 9007PJ At GQBrands®, we want all of our customers to be completely To order these parts, or if you have any other questions or concerns satisfied with their purchase. Take time to review the contents of the...
Page 3
• DO NOT allow more than one person on Tool to attach the Springs. Work gloves are the trampoline at a time. recommended to be worn when attaching the Springs to protect against pinch points. • DO NOT wear glasses or helmets when using the trampoline. MODEL# 9007PJ...
PARTS LIST Side Legs with Rubber Feet Jump Mat Front/Back Rails Handle with Foam Frame Pad GQBrands.com CustomerService@GQBrands.com 1-866-498-5269...
Page 5
Springs 10 - Lock Knob 11 - Short Bolts 12 - Large Washers 13 - Large Hex Nuts 14 - Large Safety Cap 15 - Long Bolts 16 - Washer 17 - Hex Nut 18 - Safety Cap MODEL# 9007PJ...
Page 6
ASSEMBLY INSTRUCTIONS STEP 1: Parts: Part 1 (x2) - Side Legs with Rubber Feet Part 2 (x2) - Front/Back Rails Face the Front/Back Rails (2) to the Side Legs with Rubber Feet (1) by aligning the openings. All upper openings must be facing upwards to attach the springs.
Page 7
To ease the tension, and avoid ripping on the Jump Mat, place 4x Springs (3) as shown in the image. NOTE: The Jump Mat will have a skirt installed, it must be facing upwards to cover the springs. MODEL# 9007PJ...
Page 8
ASSEMBLY INSTRUCTIONS STEP 5: Parts: Part 9 (x26) - Springs Once the first springs have been installed, complete the installation on the Jump Mat by installing the remainder of the Springs in a clockwise direction. STEP 6: The Jump Mat Skirt can now be stretched out to cover all springs.
Page 9
Part 15 (x4) - Long Bolts Part 16 (x4) - Washer Part 17 (x4) - Hex Nuts Part 18 (x4) - Safety Cap (10) STEP 8: Parts: Part 8 (x2) - Handle Uprights Part 10 (x2) - Lock Knob MODEL# 9007PJ...
Page 10
ASSEMBLY INSTRUCTIONS STEP 9: Parts: Part 4 (x1) - Handle with Foam Place the Handle with Foam (4) on top of the Handle Uprights by pressing down on the Snap buttons, sliding the Handle down, and letting the buttons meet with the openings to secure it.
Page 11
ASSEMBLY INSTRUCTIONS STEP 11: Tighten the loop strings onto all the legs of trampoline to secure the Frame Pad, and to avoid it from shifting. MODEL# 9007PJ...