Advertisement
ASSEMBLY INSTRUCTIONS
(5)
(7)
6
Square
(5)
Opening
(15)
(9)
STEP 2:
Parts:
8x T-Section Pieces (Part 5)
4x 40mm Square Neck Bolts (Part 7)
4x Nuts (Part 9)
4x U-Shaped Bracket (Part 15)
Locate the (A) openings in the frame
(Shown in Page 5) to begin installing the
T-Sections Pieces into the Frame.
Round
A. Place a T-Section Piece on the outside
Opening
of the frame and the other half from the
inside of the Frame. Make sure that the
T-Sections are facing up to install the
legs in Step 6.
Insert a U-Shaped Bracket (15) to both
T-Sections from the bottom.
NOTE: The square opening of the
U-Shaped Bracket must face the outside
of the frame, and the round opening of
the bracket must face the inside of the
frame, facing the mat.
B. Insert a Bolt (Part 7) from the outside of
the frame to show the smooth surface
between both T-Section Pieces. Secure
with a Nut (Part 9). Tighten loosely.
NOTE:
Make sure Bolt is fully inserted and the
Nut is not fully tightened. This will help
inserting the Legs in Step 6.
C. Continue to install all T-Sections in the
remainder of the (A) openings of the
frame.
Tighten
Loosely
GQBrands.com
CustomerService@GQBrands.com
1-866-498-5269
Advertisement
