Dimm Installation; Dimm Removal - Supermicro X11DDW-L/NT User Manual

DIMM Installation

1. Insert DIMM modules in the following
order: For CPU1, begin with P1-DIMMC1,
P1-DIMMB1, P1-DIMMA1 then P1-
DIMMF1, P1-DIMME1, P1-DIMMD1.
For CPU2, begin with P2-DIMMC1, P2-
DIMMB1, P2-DIMMA1 then P2-DIMMF1,
P2-DIMME1, P2-DIMMD1. For the system
to work properly, please use memory
modules of the same type and speed on
the motherboard.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Use two thumbs together to press the
notches on both ends of the module
straight down into the slot until the module
snaps into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.

DIMM Removal

Reverse the steps above to remove the DIMM
modules from the motherboard.
LE1
JUIDB1 C
A
JM2_1
LE3
S-SATA 0~3
S-SGPIO2
SRW1
BIOS LICENSE
MAC CODE
X11DDW-L
REV:1.02
JRK1
JL1
DESIGNED IN USA
JNVI2C2
P1 DIMM
P2 DIMM P2 DIMM
FAN6 FAN5
Release Tabs
Press both notches
straight down into
the memory slot.
37
Chapter 2: Installation
VGA
USB2/3
(3.0)
LAN2 LAN1
IPMI_LAN
USB0/1(3.0)
10G PHY
C621
JSTBY1
BMC
I-SATA 0~3 I-SATA 4~7 JBT1
LEDM1
BAR CODE JSDCARD1
BT1
JAOM
JF1
LE2
PWRRST PS UID NIC NIC HDD PWR X NMI
ON FAIL LED 2 1 LED LED
P1 DIMM
FAN4 FAN3 FAN2 FAN1
Notches