X11DDW-L/NT User's Manual
Motherboard Features
CPU
•
Dual Intel Xeon 81xx/61xx/51xx/41xx/31xx series processors (Socket P)
Note: Both CPUs need to be installed for full access to the PCI-E slots, DIMM slots, and onboard controllers. Refer
to the block diagram on page 16 to determine which slots or devices may be affected.
Memory
•
Integrated memory controller supports up to 1536GB of ECC Load Reduced DIMM (LRDIMM), Registered DIMM (RDIMM),
and Non-Volatile DIMM (NV-DIMM) DDR4 (288-pin) 2666MT/s modules in 12 slots
DIMM Size
•
Up to 128GB at 1.2V
Note 1: Memory speed support depends on the processors used in the system.
Note 2: For the latest CPU/memory updates, please refer to our website at http://www.supermicro.com/products/
motherboard.
Chipset
•
Intel C621 (-L)
•
Intel C622 (NT)
Expansion Slots
•
One (1) PCI-Express 3.0 (x16 + x16) slot supported by CPU1 and CPU2 for Left Riser Card (SXB1)
•
One (1) PCI-Express 3.0 x16 slot supported by CPU2 for Right Riser Card (SXB2)
•
One (1) PCI-Express 3.0 x16 slot supported by CPU1 for SAS3 AOM controller (JAOM)
BaseBoard Management Controller (BMC)
•
ASpeed AST 2500 Baseboard Controller (BMC) supports IPMI 2.0
•
One (1) dedicated IPMI LAN located on the rear IO backpanel
Graphics
•
Graphics controller via AST 2500 BMC (BaseBoard Management Controller)
I/O Devices
•
SATA 3.0
•
RAID (PCH)
Note: The table above is continued on the next page.
Motherboard Features
Fourteen (14) SATA ports
•
I-SATA0~3, I-SATA4~7
•
S-SATA0~3
•
S-SATA4,S-SATA5 (SuperDOM support)
•
RAID 0, 1, 10
14