Attaching The Processor To The Cpu/Heatsink Carrier - Supermicro X11DDW-L/NT User Manual

Attaching the Processor to the CPU/Heatsink Carrier

To properly install the CPU onto the CPU/heatsink carrier, please follow the steps below.
1. Locate Pin 1 (Notch A), Notch B, and Notch C on the CPU and locate Pin 1 (Notch A),
Notch B, and Notch C on the CPU/heatsink carrier.
2. Align Pin 1 (Notch A), Notch B, and Notch C on the CPU with the corresponding
notches on the carrier. Once they are aligned, carefully insert the CPU into the carrier
until you hear a click. Once the CPU is properly mounted onto the carrier, the CPU/
carrier assembly is made.
CPU
(Upside Down)
Align CPU Notch C
and Clip C
A
C
Allow Clip C to
Latch on to CPU
Pin 1
A
B
C
C
Allow Clip B to
Latch on to CPU
B
CPU Mounted on
Package Carrier
(Upside Down)
29
Chapter 2: Installation
Align CPU Pin 1
Align CPU Notch B
and Clip B
A
B
Package Carrier
(Upside Down)
CPU Mounted on
Package Carrier
(Rightside Up)