Preparing The Cpu Socket For Installation; Removing The Dust Cover From The Cpu Socket - Supermicro X11DDW-L/NT User Manual

X11DDW-L/NT User's Manual

Preparing the CPU Socket for Installation

This motherboard comes with the CPU socket pre-assembled in the factory. The CPU socket
contains 1) a dust cover, 2) a socket bracket, 3) the CPU (LGA3647) socket, and 4) a back
plate. These components are pre-installed on the motherboard before shipping.

Removing the Dust Cover from the CPU Socket

Remove the dust cover from the CPU socket, exposing the LGA3647 socket and socket pins
as shown on the illustration below.
Note: Do not touch the socket pins to avoid damaging them, causing the CPU to
malfunction.
Processor Socket Assembly
Socket Cover
28
Socket Pins
LGA3647 Socket