Motherboard Installation; Tools Needed; Location Of Mounting Holes - Supermicro X11DDW-L/NT User Manual

2.2 Motherboard Installation

All motherboards have standard mounting holes to fit different types of chassis. Make sure
that the locations of all the mounting holes for both the motherboard and the chassis match.
Although a chassis may have both plastic and metal mounting fasteners, metal ones are
highly recommended because they ground the motherboard to the chassis. Make sure that
the metal standoffs click in or are screwed in tightly.
Phillips
Screwdriver
(1)

Tools Needed

JRK1
JL1
JNVI2C2
P2 DIMM
FAN6

Location of Mounting Holes

Notes: 1) To avoid damaging the motherboard and its components, please do not use
a force greater than 8 lb/inch on each mounting screw during motherboard installation.
2) Some components are very close to the mounting holes. Please take precautionary
measures to avoid damaging these components when installing the motherboard to
the chassis.
Phillips
Screws (7)
LE1
JUIDB1 C
A
JM2_1
LE3
C621
S-SATA 0~3 I-SATA 0~3
S-SGPIO2
SRW1
BIOS LICENSE
MAC CODE BAR CODE
X11DDW-L
REV:1.02
DESIGNED IN USA
P1 DIMM
P2 DIMM
FAN5
23
Chapter 2: Installation
Standoffs (7)
Only if Needed
VGA
USB2/3
(3.0)
LAN2 LAN1
IPMI_LAN
USB0/1(3.0)
10G PHY
JSTBY1
BMC
I-SATA 4~7 JBT1
LEDM1
JSDCARD1
BT1
JAOM
JF1
LE2
PWRRST PS UID NIC NIC HDD PWR X NMI
ON FAIL LED 2 1 LED LED
P1 DIMM
FAN4 FAN3 FAN2 FAN1