Hardware options installation
Introduction
If more than one option is being installed, read the installation instructions for all the hardware options and
identify similar steps to streamline the installation process.
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system
components to cool before touching them.
CAUTION:
To prevent damage to electrical components, properly ground the server before beginning any
installation procedure. Improper grounding can cause electrostatic discharge.
Installing the security bezel option
The security bezel helps prevent unauthorized physical access to the front panel components. Install the
security bezel and then lock it with the key provided with the kit.
Drive options
For a list of drive configurations supported in this server, see Drive numbering.
The embedded Dynamic Smart Array B140i Controller supports SATA drive installation. For SAS support,
connect the drive to the onboard Flexible Smart Array P840ar Controller or to a Smart HBA or a Smart Array
Controller option.
For more information about product features, specifications, options, configurations, and compatibility, see the
product QuickSpecs on the Hewlett Packard Enterprise website.
Drive installation guidelines
When adding drives to the server, observe the following general guidelines:
60
Hardware options installation