Brother ADS-2200 Online User's Manual page 98

4. Using a computer connected to the network, in your browser's address bar, type the IP address of the device
you are using as the Registrar. (For example: http://192.168.1.2)
5. Go to the WPS settings page and type the PIN, and then follow the on-screen instructions.
• The Registrar is usually the wireless access point/router.
• The settings page will differ depending on the brand of wireless access point/router. For more detailed
information, see the instructions supplied with your wireless access point/router.
®
If using a Windows 7, Windows
the following steps:
6. Do one of the following:
®
• Windows 10
Click > Windows System > Control Panel. In the Hardware and Sound group, click Add a device.
®
• Windows 8 and Windows
Move your mouse to the lower right corner of your desktop. When the menu bar appears, click Settings >
Control Panel > Hardware and Sound > Devices and Printers > Add a device.
®
• Windows 7
Click (Start) > Devices and Printers > Add a device.
• To use Windows
register it to your network in advance. For more detailed information, see the instructions supplied with
your wireless access point/router.
• If you use Windows
scanner driver after the wireless configuration by following the on-screen instructions. To install the full
driver and software package, see the Quick Setup Guide.
7. Select your machine and click Next.
8. Type the PIN displayed on the machine's LCD, and then click Next.
®
9. (Windows 7 only) Select your network, and then click Next.
10. Click Close.
If your wireless device is connected successfully, the LCD displays [Connected].
You have completed the wireless network setup. To install drivers and software necessary for operating your
device, go to your model's Downloads page on the Brother Solutions Center at support.brother.com.
To configure additional Network Settings, use the Web Based Management. See Related Information: Access
Web Based Management
Related Information
• Additional Methods of Configuring Your Brother Machine for a Wireless Network
• Access Web Based Management
®
8, Windows
®
8.1
® ®
7, Windows 8, Windows
® ®
7, Windows 8, Windows
® ®
8.1, or Windows 10 computer as a Registrar, complete
® ®
8.1, or Windows
®
8.1, or Windows
10 computer as a Registrar, you must
®
10 as a Registrar, you can install the
94