Home >
Routine Maintenance
>
Replace Supplies
> Replace the Brake Roller
Replace the Brake Roller
Your machine is equipped with a scan counter that automatically counts how many times the machine has
scanned. After approximately 100,000 scans, you may have to replace the Brake Roller.
1. Press the release tab to open the Front Cover (1).
1
2. While pushing the left side of the Brake Roller Cover (1) from the back of the machine, pull the cover down.
1
3. Lift the shaft of the Brake Roller (1) with your finger to remove the roller.
1
4. Fit the shaft of the new Brake Roller (1) into the slot in the opening and insert the Brake Roller into the
machine.
171