Area Not To Be Perforated - Brother ADS-2200 Online User's Manual

Home > Paper Handling > Document Specifications > Unacceptable Documents > Area Not to be
Perforated

Area Not to be Perforated

An error may occur if your document has punched holes in the area shaded in light blue in the following figure:
1
7
2
6
5
3
4
1. 45 mm
2. Top
3. Bottom
4. Centre
5. Feed direction
6. Front side
7. Reference point
This condition applies when the document is set in the centre of the Pick Up Roller.
Related Information
• Unacceptable Documents
17