Brother ADS-2200 Online User's Manual page 174

1
5. Fit the new lower Pick Up Roller into the opening, and then slide it to the left onto the shaft.
6. Fit the new upper Pick Up Roller into the opening, and then slide it to the left onto the shaft.
7. Close the Pick Up Roller Cover.
8. Close the Front Cover and attach the ADF.
9. Reset the Pick Up Roller Counter. See Related Information:Reset the Usage Counters
NOTE
Confirm the following:
• The Roller Count value is 0.
• The touchscreen or LED indications do not display a replace Pick Up Roller message.
Related Information
• Replace Supplies
• Reset the Usage Counters
2
170